DMA Aimbot Guide

This general purpose guide will teach you how to configure your hardware to use the aimbot in our cheats!

Device Interfaces

What is a interface?

An interface is how your computer sends data to the device, it maps general commands to unique tasks. Many third party devices default firmware will use the KMBOX B command interface.


Example:
"km.move(10, 0)" -> Moves mouse to the right by 10 px.


What interfaces we support:

  • KMBox B+ (Serial)

  • KMBox Net (UDP)

What is a interface?

An interface is how your computer sends data to the device, it maps general commands to unique tasks. Many third party devices default firmware will use the KMBOX B command interface.


Example:
"km.move(10, 0)" -> Moves mouse to the right by 10 px.


What interfaces we support:

  • KMBox B+ (Serial)

  • KMBox Net (UDP)

What is a interface?

An interface is how your computer sends data to the device, it maps general commands to unique tasks. Many third party devices default firmware will use the KMBOX B command interface.


Example:
"km.move(10, 0)" -> Moves mouse to the right by 10 px.


What interfaces we support:

  • KMBox B+ (Serial)

  • KMBox Net (UDP)

KMBox B+

Tested and verified devices:

  • KMBox B+

  • KMBox B+ Pro

  • Makcu

NOTE: These are what we've tested, we should support any serial device that uses the KMBox B+ interface


Troubleshooting:

  • Ensure the device's COM USB connects to your CHEATING computer, and the device's PC USB connects to your GAMING computer.

  • Make sure you installed the driver that the device uses to communicate. Eg. CH341, CH343. A link to this should be on the seller's website/setup instructions.

  • If your mouse is lagging (Common with KMBox B+) plug your mouse directly into your PC, the only required connections are KMBox->COM and KMBox->PC.

  • Some devices like Makcu/M-Kit require you to flash the KMBox B+ firmware yourself, refer to the brand's support that you purchased your device from to get help with this subject.


KMBox NET

Tested and verified devices:

  • KMBox NET

The only known device using the interface of NET, is KMBox's very own KMBox NET


Once device is powered the IP, Port, and device name should all be showing on the LCD. Use these when configuring aimbot settings.


Troubleshooting:

  • Ensure the device's COM USB connects to your CHEATING computer, and the device's PC USB connects to your GAMING computer.

  • Make sure your CHEATING computer has an active connection.

  • Make sure that you do NOT have a VPN running as the device uses UDP to connect.

General Advice

Aimbot spinning off of target/flicking across screen.

Increase smoothing/frame skips until the cheat closely tracks target.


Anti-Recoil:

Anti recoil ONLY works when you are aimbotting, we do not yet offer a standalone recoil control system.